50MM BUCKET PIN skid steer

50MM BUCKET PIN skid steerThis Universal Bucket Pin is 50mm in diameter with a length of 17. 50" it has a bevel and hole at one end for a keeper. Please refer to the drawing for specific dimensions. This is a solid case hardened pin. The Customer can do any final tooling such as adding grease fittings or welding on tabs or flags as may be needed. This item should be used to pin on a bucket and may not have the proper characteristics for other attachments. Rotating pins must be

It is roughly 7/8" thick

This is a Hensley style x156L long general purpose bucket tooth

This bolt on End Bit has an industry standard part number of T120978 and has 3 bolt holes

This is a V39vy Esco style Super V pointed bucket tooth

This is a cat K110 series style twin pointed bucket tooth with industry standard part number of 470-7973

This Pin Removal Tool is used to remove pins from bucket teeth

1-1/4" x 5-1/2" Grade 8 cutting edge or plow bolt

This bolt on side cutter (can be welded on) is for loader buckets and has an industry standard part number of 253-0061 and are for Caterpillar 914-943 models

You will also need a 45pn pin

NARROW CHISEL L22B12 11X JUMBO RIVET BUSTER

This Steel Snowplow Edge has an industry standard part number of 49089

This bolt on Cutting Edge has an industry standard part number of T187988 and has 3 bolt holes