Hornady Shell Holder #23 for Reloading Press brand_-Dasco

Hornady Shell Holder #23 for Reloading Press brand_-DascoThe Hornady Shell Holder #23 is a solid steel, heat treated press accessory that snaps into the ram of a reloading press to hold cartridge cases securely during sizing, bullet seating and priming operations. Each press stroke draws the case into or through the die with the shell holder gripping the rim or extraction groove firmly in the ram's shell holder slot, ensuring the case stays on the die axis and comes out uniformly processed. The wide mouth

where a warm-coloured beam can be less startling to quarry than the full white output

leaving you free to handle the lead and dummy

Oiled full cow leather upper

Made from 60% polyester and 40% elastane

Weight: 292g

running 37

Use the adhesive alone for awkward splits

The G19LRF also features a laser range finder (LRF) that will allow detection distance to be shown

tool-free installation that keeps the rifle's receiver intact

Bullet Coating: Non-Coated

It attaches to any standard MOLLE or PALS webbing

giving a quoted ballistic coefficient of 0