SRAM 2010 Later 9-speed X9 X7 Rear Derailleur Hanger Bolt Assembly Parts Kit Brand-Tri-Flow

SRAM 2010 Later 9-speed X9 X7 Rear Derailleur Hanger Bolt Assembly Parts Kit Brand-Tri-FlowSRAM 2010 and Later 9 speed X9 and X7 Rear Derailleur Hanger Bolt Assembly Parts Kit. Upper Bolt and Spring kits for SRAM rear derailleur maintenance and repairs.

The CCP-22 uses extra-fine thread and a long comfortable handle that provides the needed leverage to remove even the tightest cranks

BB Included No Chainline/Hub Compatibility 130 Hubs Chainline/Hub Compatibility 135/142 Road Disc Hubs > 415 mm Chainstay Chainring BCD 130 Chainring BCD 110 Color Black Crank Intended Use Road Crank Length (mm) 172

The Canti Lever is a short pull brake lever for use with short pull brakes like cantilevers center pull brakes and side pull caliper brakes

}SRAM NX Eagle PG-1230 Cassette - 12 Speed 11-50t Black

Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm

}Paul Component Engineering Motolite Linear Pull Brake Silver

Largest cog is aluminum

}TRP-25 Disc Brake Rotor - 203mm Center Lock 1

}Full Speed Ahead Bottom Bracket Adaptor for 386 EVO Crankset on BB30 or PressFit 30 Frame

This discoloration is normal and will not compromise performance

For threadless steerers

BB Shell Width (mm) 86 BB Shell Width (mm) 92 BB/Frame Interface BB86 BB/Frame Interface BB92 BB/Frame Interface PF41 Bottom Bracket Shell I