MULTIFUEL HYDRAULIC HEAD/FUEL CUT OFF O RING KIT - VITON - HYDHKIT3 Brake System Parts

MULTIFUEL HYDRAULIC HEAD/FUEL CUT OFF O RING KIT - VITON - HYDHKIT3 Brake System PartsA VERY COMMON PROBLEM WITH THE MULTI FUEL ENGINES IS FUEL MAKING ITS WAY INTO THE CRANK CASE. THERE ARE A FEW KNOWN WAYS THIS CAN HAPPEN. LEAKING BOOSTER PUMP SEAL LEAKING FUEL DENSITY COMPENSATOR LEAKING MANIFOLD FLAME HEATER LEAKING HYDRAULIC HEAD O RINGS IF YOUR FUEL DENSITY COMPENSATOR HAS BEEN BYPASSED, AND YOU HAVE PULLED THE BOOSTER PUMP OFF THE INJECTION PUMP WITH THE LINES STILL CONNECTED AND TURN ON THE INTANK PUMP AND FOUND NO LEAK, THEN

# 5743562  NSN 2940014003846

WILL NOT WORK FOR M35A3 OR M809 SERIES TRUCKS

4730-00-155-3045

I HAVE CRIMPED ON THE GROUND LUG

AS WELL AS A SET OF TWO FEATURING THE LARGE AND SMALL PINION BEARINGS

WE HAVE THOSE ALSO AND EVEN HAVE KITS FEATURING MULTIPLE LOCK WASHERS

REAR INNER LUG NUTS FOR MILITARY 2

USA MADE PUMP

5 TON APPLICATIONS

AND ONE WITH SOCKETS

AIR FILTER TO FIT ALL M35A2 SERIES TRUCKS WITH THE MULTI FUEL LD-465 OR LDT-465 ENGINES

WE ALSO SELL THESE SINGLE IN OUR STORE