Set Screws (50 Qty) Sample Product

Set Screws (50 Qty) Sample ProductIn order to lock the bracket system into place, we prefer using set screws on the bottom of the bracket. We at Hovr Strong Solutions prefer to use 5 16 #18 set screws. You can, however, use smaller ones, such as 20 or # 10 24. We use a Cup point, Hex drive, Black Oxide, Alloy steel. Please note: each order come with 50 units of your choosing. WHAT'S INCLUDED Each unit comes with: 50 x Set screws of your selection

1 x Taper tap bit 5/16 inch #18

16 x Long Pan Head Wood Screws (2 ½”)

In order to make extra holes in the female bracket

Only to be used in the top of the dyeline of the male bracket

first we need a Cobalt 17/64 inch bit (or you can use even a 7/64 inch bit)

Flexible when cured

50 x Small Pan Head Wood Screws (1 ¼”)

In order to lock the bracket system into place

Please note: each order come with 50 units of your choosing

then you will want to order our Installation Hardware Pack

We use a Cup point

Maintains high shear and peel strength