Creality Falcon A1 To 4 Inch (101mm) Hose Adapter depthmap

Creality Falcon A1 To 4 Inch (101mm) Hose Adapter depthmapBuild your custom smoke and fume extraction system with hose adapters allowing you to transition between various size hoses. This part allows you to connect a 4 inch (~101mm) hose to the back of the Creality Falcon A1 for the purpose of smoke and fume extraction of your laser cutter and engraver. Certain laser enclosures such as the ones from XTOOL and Creality typically include some length of 3 inch hose as well as a 3 inch hose flange on the side of

Required hardware

peeling vinyl decals

TO USE THIS KIT YOU MUST UPGRADE YOUR CR-6 SE TO AN AFTERMARKET CONTROL BOARD USING THE 'EASY SWAP' PCB KIT

That filtration kit can be found here: Fume Extractor Conversion Kit

Creality Falcon Tilt Mechanism

3x M5x60 SHCS

Air Filter (Vista 200-RF) (See link below)

This eliminates the eccentric rolling on the very small 8mm shaft and keeps the pulling force required by your extruder more consistent

Customized bottle stoppers are very popular and can be found with wood tops (use the blue diode laser) or aluminum tops (use the IR laser)

Upgrade your XTool RA2 Pro rotary attachment with the parts as seen in the video above

Laser Proof Silicone Work Surface Mat (23

This part allows you to connect a 4 inch (~101mm) hose to a 3 inch (76mm) flange for the purpose of smoke and fume extraction of your laser cutter and engraver