Lancer Evolution 7/8/9 Intercooler K20 seals

Lancer Evolution 7/8/9 Intercooler K20 sealsTig welded aluminum 22x12x3. 5 core Custom endtanks 2. 5" or 3" outlets with bead Mounting brackets on each side Pressure tested to 40 psi 800hp Widetank to fill in the bumper opening Or can be used in other applications

Block off plate will need some rtv to seal

The GenV External Wastegate from Turbosmart was a ground up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation

To plumb your boost lines from the wastegate and turbo to the solenoid

Intercooler for narrower size grill or tighter space

25 mounting bungs on each side

This style can be routed more like the OEM k-series engine harness through the center or more to the right on the firewall than it's Version 1 counterpart

Fill pot for b16 heads

use the Evo 8 style lower hose

25 12pt nut

Stainless 304 turbo manifold

Required at track if you vehicle goes 11

Forged & treated adjustment screws