Furuno Interface Kit NavPilot 700 Series to Yamaha Helm Master [FAP6310] Brand_Magma

Furuno Interface Kit NavPilot 700 Series to Yamaha Helm Master [FAP6310] Brand_MagmaInterface Kit NavPilot 700 Series to Yamaha Helm Master The FAP6310 is an optional interface kit that can be connected to the NavPilot 700 series, allowing it to control the Yamaha Helm Master system. The Yamaha Helm Master system consists of an NMEA2000 based network called EVC (Electric Vessel Control), and the system is controlled electrically. The NAVpilot 700 is interfaced with the EVC via two units: Autopilot Gateway and Interface Unit. The

Gaskets (surface and Flush)

LEDs Installed - 1 x Red (Reverse Polarity - 230V AC and 3 x Green ON (230V AC)

When using with 6-pin Garmin sounder

can be cut to size and they can be mounted virtually anywhere

Submersible and Ignition Protected

Designed to operate anywhere

Fits 3″ Instrument Hole

and Lexan® dual-mounting bracked

One transducer transmits and receives to port and downwards

Maretron cables have a male connector on one end and a female connector on the other end

Patent# 8347546B2

Fastener: #10