2.5" to Small Tool Adapter Include 2.5" Air Hose Adapter:Yes

2.5" to Small Tool Adapter Include 2.5" Air Hose Adapter:YesThis adapter converts from our 2. 5" mag ring and female air hose adapter to a "small tool" port. Kreg's pocket hole machine is one such example, but other tools use similar ports. The ID of the small end is 35. 9mm, and the OD is 40. 9mm. Be sure to check to be sure this will work for your application.

💡 Note:

you may want this offset adapter

our assistance is limited

it enables automatic tool height calibration by sending precise signals directly to your controller

The Woodworker/Journeyman have 16mm clearance between the holder an the table

You can also use the Foreman racks on the Woodworker and Journeyman if your machine is on the Riser Blocks

There is a gap in the back of the brush

✅ Key Features:

use a zip-tie around the tube to properly secure

This allows you to use both at the same time and it keeps your dust hose out of the way

With this 3D probe

Check out our Probe Mount accessory to keep your workspace tidy between jobs