Module Reconditioning draft inducer

Module Reconditioning draft inducerRather than send the entire INOV8 burner in for reconditioning, you can send the Module from the burner. That is the assembly that contains most of the small components and oil delivery that requires cleaning and possibly replacing. It looks like the photo and can be removed from the burner easily and within a few seconds, and can be packaged and sent to INOV8 for reconditioning. It will be thoroughly cleaned and tested and any failed components

When used with the gas-oil burner the coupler is also different

mounting bracket

Bimba cylinder and flame retention head

The DTC provides a LED read-out showing the current temperature and the set-points which can be easily changed to accommodate heavy oil

Oil Strainer Housing by Combu includes a stainless steel #100 screen mesh with a gauge

locknut and air pressure gauge (which is 160 psig)

Smaller pressure ranges are available but not always applicable

SKU : 90094

synthetic or vegetable based oil that require a higher preheat temperature

Horizontal Tanks also available that support the smaller boilers: 53 Gallons and 79 Gallons with continuous flow rating of 124 and 182 GPH respectively

The flange assembly is machined and the shaft length is shortened

you can send the Module from the burner