AIM Technologies MXL2 / MXS / STRADA Dash Mount - Modular Steering Assembly Chassis Tab:With 90degree Bolt on Mount

AIM Technologies MXL2 / MXS / STRADA Dash Mount - Modular Steering Assembly Chassis Tab:With 90degree Bolt on MountAIM Technologies MXL2 MXS STRADA Dash Mount Due to the size of the Dash, this will probably more likely be used with our single mount centre hub on the steering column or our chassis weld on and bolt on tabs. Though this will work with out steering wheel mounts if you prefer. Optional Weld on tab for your chassis or steering column. 2mm thick in Raw Stainless Steel Our Modular Steering Wheel Components are Stainless Steel (raw finish) interchangeable

Trim Bumper if needed (depends on type)

These must be installed at the very end each side

Optional Steering wheel mount ( www

Option of 7mm or 11

Remove your splitter and drill the holes

Re attach and bolt the front mount to the splitter using the coach bolts

The photos are all of this quality in an un-modified condition

The most common configuration is to have a dash mounted to the top and either 2x side button mounts (3 spoke wheels) or 1x bottom button mount (2 poke wheels)

Our centre hub sandwiches between your steering wheel and quick release mechanism/steering column and facilitates the attachment of our accessories for buttons

2mm Stainless bent at 90 degrees

) and the Quadlock Male Mount (option on this listing)

Similar to race technology's own steering mount but by using our setup it allows the fitment of button add-ons easily