3000w hub motor laced in 26"/27.5"/29" wheel alone Voodoo torque arm

3000w hub motor laced in 26"/27.5"/29" wheel alone Voodoo torque armPLEASE NOTE THIS KIT IS TO BE USED OFF PUBLIC ROADS AND OR ON PRIVATE PROPERTY WITH THE NECESSARY PERMISSIONS ONLY. For an ebike kit to be UK road compliant it has to have a maximum power output of 250 watts and limited to 15. 5mph. Please visit the GOV. UK site for more information. Max current they can handle is 80 amps Max raccomended voltage 72v 3. 5t motor Dropout size is 150mm* 1610mm axle so will require 16mm torque arms Mtx39 double walled rim

Max current they can handle is 45 amps

-UKC1/ SW900 display

You can see the difference in the bags in the last 3 photos where the one with the "epower" logo is the newer one

DNM usd-8 and many more

this means that it will fit frames of all tube sizes which means you will not need to pull the straps to make them "close" which stresses the straps and the bag and eventually leads to rips

After building over 200 ebikes I ve gathered the issues I had with my previous controller bag of this size and got this bag customised to solve most of them

Frames that they fit on:

35mph on 52v

less stress on the bag and more space for wires

I have a wide selection of batteries all compatible with this kit

I have personally fitted all sorts of tyres on these rims and from experience I would suggest tyres between the width of 2" and 3"

I also have MTX39 rims in all sizes